Elektromagnetnim ventilom se vrši automatsko odzračivanje sistema tj. preusmeravanje protoka pumpi u drenažni odvod. TEHNIČKI PODACI ZA ELEKTROMAGNETNI VENTIL BÜRKERT 0124 Tip: 124 Namena: agresivni mediji Priključci: 1/4″ Napon napajanja: 24 V DC Snaga: 8 W Materijal tela: PVC Materijal membrane: EPDM Upravljanje: PLC
Senzor protoka poseduje svaka pumpa u sistemu, tako da postoji informacija o potrošnji hlora u realnom vremenu i prikazana je na dijagramu. Ako se ne poklapa realan (očitani protok na senzoru) sa referentnim protokom na radnoj pumpi automatski se prelazi na rezervnu pumpu. Tehnički podaci senzora protoka SIGMA 100 Tip senzora: SIGMA 100 Namena: […]
Senzor je ugradjen u zajedničko kućište sa transmiterom. Merenje se vrši posredno, preko brzine tečnosti, koju elektronika u transmiteru, pomoću odgovarajućih parametara vezanih za prečnik cevi, pretvara u protok. Očitani protok senzor preko transmitera u vidu strujnog signala od 4-20mA šalje na PLC pumpi. U zavisnosti od promene protoka pumpa povećava ili smanjuje doziranje hlora. […]
Dozirne pumpe služe za doziranje/injektiranje rastvora dezinfektanta u vodu na pravilno izabranom mestu. Mesto doziranja bira se tako da se obezbedi što bolje mešanje, tj. homogenizacija dezinfektanta i vode. Dezinfekciono sredstvo se ubrizgava u sredinu cevovoda pomoću perforirane cevi / difuzora, zbog što bržeg i potpunijeg umešavanja dezinfektanata. Pumpa je prikazana šematski i u vidu […]
PROCESSOR CONTROL UNIT WITH PERIPHERAL DEVICES: Central processor unit, in communication with the peripheral processor units, sensor and actuators, makes the process control system. Processor system is based on ATMEL AVR with special designed software, which is designed by our expert team. Output for a connection to the standard PC (connector for serial port – […]
HYDROGEN DILUTION WITH FAN VENTILATION SYSTEM This system is specially designed for dilution of the hydrogen produced in electrolytic process and releasing it to the open air. Specially designed fan blows fresh air in the electrolyzer and mix it with the hydrogen. Hydrogen is diluted to amount of max. 10 % of lower explosion level, […]
Supplies electrolyser with the low voltage, DC current. Switching power supply’s basic characteristics: It is supplied from mains AC 220 V, 50 Hz. DC electrolytic current stays constant eaven when the mains voltage has variations from 90 to 260 V. Power cabinet supplies all equipment (electrolyzer, pumps, valves, ventilation, process control, signalization, etc.). All […]
Dosing pumps for the softened water P2, and the saturated brine P1, feed the electrolyzer with the softened water and the brine. When mixed, they are creating 3% diluted brine solution, which is used in the electrolytic process. P1 pump feeds the electrolyzer with one part of the saturated brine. P2 pump feeds the electrolyser with nine parts […]
Softened water tank stores the softened water from the water softener. Pump P2 (dosing pump for softened water) takes softened water to the electrolyzer where it is mixed with saturated brine in 10:1 ratio.
Salt saturator creates brine solution that feeds the electrolyzer. 30% saturated brine solution is created by passing prepared water through salt bed. It is then fed by brine dosing pump P1 to the electrolyzer. The saturator is sized for 30 or more days of production in order to ensure sufficient salt quantity to provide continous […]
