PROCESSOR CONTROL UNIT WITH PERIPHERAL DEVICES: Central processor unit, in communication with the peripheral processor units, sensor and actuators, makes the process control system. Processor system is based on ATMEL AVR with special designed software, which is designed by our expert team. Output for a connection to the standard PC (connector for serial port – […]
HYDROGEN DILUTION WITH FAN VENTILATION SYSTEM This system is specially designed for dilution of the hydrogen produced in electrolytic process and releasing it to the open air. Specially designed fan blows fresh air in the electrolyzer and mix it with the hydrogen. Hydrogen is diluted to amount of max. 10 % of lower explosion level, […]
Supplies electrolyser with the low voltage, DC current. Switching power supply’s basic characteristics: It is supplied from mains AC 220 V, 50 Hz. DC electrolytic current stays constant eaven when the mains voltage has variations from 90 to 260 V. Power cabinet supplies all equipment (electrolyzer, pumps, valves, ventilation, process control, signalization, etc.). All […]
Dosing pumps for the softened water P2, and the saturated brine P1, feed the electrolyzer with the softened water and the brine. When mixed, they are creating 3% diluted brine solution, which is used in the electrolytic process. P1 pump feeds the electrolyzer with one part of the saturated brine. P2 pump feeds the electrolyser with nine parts […]
Softened water tank stores the softened water from the water softener. Pump P2 (dosing pump for softened water) takes softened water to the electrolyzer where it is mixed with saturated brine in 10:1 ratio.
Salt saturator creates brine solution that feeds the electrolyzer. 30% saturated brine solution is created by passing prepared water through salt bed. It is then fed by brine dosing pump P1 to the electrolyzer. The saturator is sized for 30 or more days of production in order to ensure sufficient salt quantity to provide continous […]
WATER SOFTENER Water used for the salt saturator and feed water used for the dilution of the brine solution must have less than 17mg/l of CaCo3 hardness, otherwise operating efficiency and maintenance free operation would be compromised. For water supplies with hardness greater than 17mg/l of CaCO3, a water softener is required. For softening supply […]
Sodium hypochlorite solution, generated in the electrolyzer, flows to the (working) sodium hypochlorite tank, from which, through the automatic dosing system is injected in treated water. Tank has two level indicators, which are connected to Hlorogen PLC. Those two level indicators are the maximum level indicator and the minimum level indicator. When a hypochlorite level […]
Hlorogen electrolyzers are modular type with serial connected cells in number wich depends on capacity. Each cell contains two titanium anodes and three Hastelloy cathodes. The electrodes are activated with a precious metal oxide, they have high ion-selectivity and corrosion stability. Electrolyser type is «filter press» with a plastic case. Anodes are manufacturer from […]
